Commercial real estate website lead capture forms help your team reply with useful context when visitors can submit easily and their messages reach the right person.

I treat the form as a complete handoff, from the first field to the broker’s first reply.

A nice button cannot prove that handoff works.

Before the launch of the form, a test should be submitted, a message found, a reply written and the visitor’s experience verified.

That sounds basic until a leasing inquiry is sent to the inbox of some long retired employee.

This walkthrough serves as a handoff document for the Broker, Designer and Leasing Manager to approve the work.

The ultimate goal of the form is to collect enough information to have an initial conversation with a prospective visitor without requiring them to complete a loan application.

If your new website needs clearer inquiry paths, use my Website Design Price List to start a scope conversation that includes form setup and testing.

Every form needs a clear job.
Every form needs a clear job.

Every form needs a clear job.

First list all locations on your website where users can get in touch with your team.

List all pages where visitors can contact your team (contact page, service pages, property pages, brochure request pages etc.).

Forms inside an outside listing system are best treated as separate items.

For each form list the visitor’s goals and who in your team needs to respond to them.

A visitor looking for a suite as a tenant would require a different handoff than an owner of a property inquiring about representation.

I wouldn’t put both of these into a vague queue without a named owner.

Give each of these paths a clear purpose like checking availability or setting up a discussion for selling a property.

Then make the button describe the action the form really performs.

“Request property details” is reasonable if the visitor is going to send details after they have reviewed the request.

“Download the brochure” only makes sense as a button text if the promised download actually follows the submission.

Don’t make it look like a tour has been booked when all it does is list out preferred tour times.

The acceptance record should follow the whole inquiry.

Test with the most basic record to test e.g. form location, test date, sample request, recipient and result.

Add separate spaces for the saved submission, internal notification, visitor confirmation and broker reply.

This keeps a missing email from getting hidden behind an attractive success message.

Use your own company test contact details rather than entering fictional details of a prospect.

Have all parties involved agree to what constitutes a successful test before they start testing.

For example, a leasing request should preserve the property, reach the leasing contact, and let that contact answer the sender.

These are your project’s acceptance criteria, not the criteria that every web site package claims to fulfill.

The fields should support a useful first reply.
The fields should support a useful first reply.

The fields should support a useful first reply.

Work backward from the reply you want your broker to send.

For a general inquiry, a name, reply email and message to begin with is sufficient.

When sending a property inquiry, include the property reference to save the visitor from having to enter the full address of the property.

A phone number can remain optional for a visitor’s immediate inquiry should an email reply suffice.

If the next step is a phone call explain this alongside the field.

I would only ask for company size or budget if the rest of the team could adequately explain how that would impact next steps.

An optional field should say that it is optional.

A field required of the visitor should have a clear label and explanation of why it is required.

The W3C guidance on labeling form controls explains why controls need labels and why visible labels help people understand a form.

A hint inside an empty field should not carry the whole explanation.

Once a visitor starts typing, the hint can disappear while the question still matters.

Different inquiry types need different context.

Let’s say we have a hypothetical tenant interested in a small warehouse suite.

Having the tenant’s preferred area, approximate space required and proposed move-in date enables the broker to provide a suitable response.

Optional for now as you’re still browsing.

An owner interested in a valuation discussion discussion needs space to identify the property in question and state his goals.

There is no need for either party to commit to a transaction date at this initial stage of inquiry.

Keep sensitive financial documents out of a basic contact form.

If required later, the owner and visitor can agree on the method for transferring the sensitive financial documents.

Finally, remove the unused fields from the first contact.

Mobile and keyboard tests should expose friction.
Mobile and keyboard tests should expose friction.

Mobile and keyboard tests should expose friction.

Open the test form on a phone and fill out the form as a visitor would.

Test by starting on the actual property or service page to replicate the typical visitor’s contact path.

Check if the open keyboard hides the next field or the form’s submit button.

Long labels should still be readable and dropdowns should fit within the screen.

Try to use a name with an apostrophe and a body with a property address in it.

Remember to test for real user inquiries and not for a set of single word answers.

The W3C labeling tutorial also describes how suitable form field types can bring up useful mobile keyboards.

Can you please check with your designer whether the email field offers an appropriate keyboard on your test devices.

Now test the form using the keyboard.

You should be able to see where the focus is on each control and how to complete them.

Error messages should help someone finish.

Submit an empty required field and then try an incorrectly formatted email address.

Check that the page explains the problem near the relevant field rather than merely changing its border color.

The W3C guidance on form notifications recommends clear feedback that identifies errors and helps people correct them.

Can you check with your designer how the dynamic feedback is announced to assistive technology?

A quick visual review of your site cannot ensure full accessibility conformance.

Keep the other valid answers for the other form field that needs correction.

You do not want to have to rephrase an in depth question for a property because of one missing character.

Try to fill out the form completely again after you have made the correction to test if it works as expected.

Keep a record of the device and browser used when a problem arises so the designer can replicate the issue.

Delivery tests should go beyond the success message.
Delivery tests should go beyond the success message.

Delivery tests should go beyond the success message.

Submit a test inquiry clearly marked as such, with note of the exact time it was submitted.

Look for it in the destination that your team uses every day.

Check if the stored submissions and the email notification were saved too.

These are two separate tests because an email and a stored record serve two different purposes.

You cannot assume that installing a form plugin automatically creates a submission archive.

For example, the Contact Form 7 FAQ says that Contact Form 7 does not save submitted messages by itself.

As I mentioned earlier, that example describes a product and not every possible form system for WordPress.

Ask your designer to go through the actual setup with you and explain what is retained, who can access it and for how long.

Next, reply to the notification using the normal reply button.

Make sure the reply actually reaches the test sender and not the internal website address (e.g., your company’s website).

Sender settings need their own check.

The Contact Form 7 mail setup documentation separates the recipient, sender, subject, and additional header settings.

It also references the sender email address should be a valid email address on the website domain.

If you’re using this plugin on your website, get your web designer to check this against the current documentation for the plugin.

For other form systems, have the designer verify against the current documentation for that form system as well.

Use the person that manages your email service to find out why the notifications are not being sent rather than trying to solve the problem by guessing.

Look at the inbox and spam folder of the intended recipient.

Even if an email is found in the recipient’s spam folder it still needs to be read.

Don’t alter lots of settings at once and then struggle to work out which change cured the problem!

Record what you did and test the original test case again.

Remember to capture a screenshot or reference to the message(s) to ensure you can show others the results without exposing sensitive information in the contact details.

Routing should keep the property with the request.
Routing should keep the property with the request.

Routing should keep the property with the request.

Send a different test message for each major route your business uses.

Test a Property Inquiry, an Owner Inquiry and a General Question each to go to the relevant person.

Test each of the different property or services choices that cause a recipient to change.

It is important to note that a default route for unknown requests is important.

I’d like the default to go to a real person and they assign it to someone in the company.

Test that for the example listing request above, the broker can see the listing name, address/reference and the visitor’s question together.

This would require the Broker to reconstitute the inquiry conversation.

Hidden context should still be checked.

Automatic carry of a property reference is not enough.

Someone must verify that the reference actually points to the correct property.

Open two different listings on the website.

Open two different listings on the website.

In one of the listings, send a test reference.

In the other listing, send a test reference.

Check that the form-submitted information does not get inherited from the referenced property.

Ask your designer to verify whether the property references submitted via the form are checked against the corresponding listing records.

Automatic context is nice, but do not assume it is accurate.

Check the CRM against the original submission for the form that connected to the CRM.

This is a handoff test, not a reason to add another CRM to the list of applications you need to research for every new website project.

For the broader ownership questions, the existing article on CRE website CRM sign-off addresses the integration review.

Here, the narrower question is whether this specific message reaches the right person with its meaning intact.

Name a backup contact for absences and decide who handles inquiries when a broker leaves.

Confirmations should match the action taken.
Confirmations should match the action taken.

Confirmations should match the action taken.

Read the on-page message as if you had never worked with this brokerage before.

It describes the action that happened and what will happen next.

“Your request has been sent to our leasing team” describes an action without promising an instant reply.

Only add a response time to the auto-response if the person on your team who is going to handle the request has agreed for this to be added.

The automated confirmation must NOT imply a reservation has been made, offer accepted or tour booked unless the system has actually completed that action.

If the automatic email is part of the scope then check it is in the test sender’s inbox.

Make sure the sender name looks right and the subject line makes sense for the request.

Keep private details out of an automated reply unless you have a good reason to include them.

Resource requests should deliver the promised resource.

Test the download link for a brochure form offered on a website and check if the promised follow-up actually takes place.

A generic thankyou page does not fulfill download promise.

Confirm that the proposed time for a tour request still needs to be confirmed.

Also, if someone is able to sign up for marketing on your website separately from an inquiry then make this option clear on your thank you page and in your inquiry form and don’t bundle it in to the inquiry form without an explanation of what it means.

Agree on the content of the privacy notice and on how inquiries will be handled with the relevant person.

This article is a website workflow review not a substitute for expert legal advice on your specific obligations.

If your form offers a helpful download, explore my Free Marketing Resources for ideas that can support the conversation after the inquiry.

You can also browse my Video Walkthroughs and Tools while planning your website, without assuming there is a tutorial for your exact form system.

The resource promise, delivery method, and follow-up message should all describe the same next step.

Launch approval should include a repeatable test.
Launch approval should include a repeatable test.

Launch approval should include a repeatable test.

Reiterate key submissions on the production website after the launch.

A test environment is not guaranteed to replicate the recipients, sender settings and connections of the live website.

Use a small, planned set of test requests (e.g. normal inquiry, correction after validation error, property specific request, fallback route) and clearly label them as test requests.

Include a simple inquiry, a correction after a validation error was encountered, property specific inquiry and a fallback scenario for the visitor.

Are legitimate users able to complete the form when you have spam protection enabled?

How would a blocked message be reviewed for and how would one investigate a false positive?

A quiet inbox after a launch does not necessarily mean there is no demand for your service.

It could also mean there were no inquiries made via the website but that does not mean to check the delivery path as well.

The handover should name the next owner.

Give the office manager the form inventory, recipient list, test results, and instructions for reporting a failure.

Who is able to change routing and who needs to approve changes to routing.

Keep private account access out of shared editorial files and public website copy.

Repeat tests for the form, mail service, domain and CRM connection after changes have been made.

A practical review schedule that matches your team’s work schedule.

Even if a test fails, make sure the alternate contact path for visitors is available until the problem with the test can be fixed by the team.

A visible contact option helps only if someone monitors it too.

If your inquiry paths need rebuilding, request my Website Pricing and include this test record in the project brief so the proposed work can be discussed clearly.

The useful finish line is a demonstrated handoff that the brokerage can repeat after the designer leaves.

Lead capture form questions have practical answers.
Lead capture form questions have practical answers.

Lead capture form questions have practical answers.

What should commercial real estate website lead capture forms ask?

Ask for the contact details and context your team needs for a useful first reply.

A name, reply email, and message can be a starting point, with a property reference added for listing inquiries.

Make extra fields optional unless the next step requires them.

Does a success message prove the broker received the inquiry?

A success message alone does not establish that the intended broker received the inquiry.

Send a marked test, find the notification in the intended inbox, inspect any saved record included in the setup, and reply to the test sender.

Should a phone number be required on a property inquiry form?

Require a phone number only when the agreed next step needs a call, and explain that requirement.

If the team can answer the opening question by email, an optional phone field gives the visitor a choice without blocking the inquiry.

Do WordPress forms automatically save every submission?

Submission storage depends on the form system and configuration.

Contact Form 7 states that it does not save submitted messages by itself.

Ask your designer to demonstrate what your actual setup stores and how an authorized team member can retrieve it.

When should the brokerage test its forms again?

Test the production forms after launch and after changes that affect forms, routing, email delivery, or connected systems.

Agree on an ongoing review schedule with a named owner.

Repeat the complete handoff rather than checking only whether the button still works.

A blonde businesswoman viewed from behind taking a video call in a modern office

Get a Website

Hi, I’m Brandy, and I’m out to take the “broke” out of commercial real estate brokerage.

I’m an award-winning commercial real estate website designer and founder of Calico Marketing, with more than 100 websites created.

My expertise is creating commercial real estate websites for brokers, agents, and developers.

Explore my Website Designs and get Website Pricing to plan a website that fits your business.

Schedule a Call or Zoom to discuss your CRE website design.